x
x

Add a comment

Device: KeyMander 2

Fallout 4 Mouse Stops then connectivity drops

Xbox One S using Keymander2. I've used it on lots of games and no issues at all. While playing Fallout 4, the mouse just suddenly stops working. If I do nothing (let it sit) about 45 seconds later I get a disconnect. Unplug and replug all works fine again for a bit then it repeats it.



KM2 APP VERS 1.1.104 Firmware 1.2.115.001


plugged into front USB on XBox One S


Have tried it with external power and without external power.


Any thoughts? Really annoying lol as you all know.




02/10/2021 5:37 PM

Does the LED change color or give any indication that something has changed?

Does the console give a "controller disconnected" error message?

Are you using batteries in the controller?

Have you tried a different controller?

What is the model number of the controller you are using?

02/11/2021 1:01 PM

Reply to:

Does the LED change color or give any indication that something has changed?

Does the console give a "controller disconnected" error message?

Are you using batteries in the controller?

Have you tried a different controller?

What is the model number of the controller you are using?

LED does not change colors.... and no controller disconnected. I can continue to operate until about 45 seconds to 1 minute later I get a controller disconnect message


The controller (a 1697) does have batteries in it.


I unfortunately only have one controller....


I did try moving the USB to one of the USBs on the back of the XBox and am testing that presently.


thanks for any insight anyone may have.


CJ

02/13/2021 7:51 AM

thus far.....


I have had good luck changing to the back USB port.


Crossing my fingers it stays working.

02/13/2021 11:50 AM

Reply to:

thus far.....


I have had good luck changing to the back USB port.


Crossing my fingers it stays working.

If you have an original Xbox One or any other version before the Xbox One X, you need to connect to a rear USB port as the front ports and especially the side port on the original XB1 do no have enough current to run the K2 with keyboard, mouse and controller connected.

02/16/2021 9:50 AM

Add a comment

Welcome,