x
x

Add a comment

Device: KeyMander 2

Keymander 2 disconnect with power

Hi, I'm using the Keymander2 via Beloader on PS5 . I connect through remote play and sometimes its fine and other times it randomly disconnects. The Beloader is still connected to remote play but the Keymander stops working. I first thought it may be a power issue to the keymander so I have it connected to an apple usb power supply. Any clues?

07/03/2023 8:21 AM

It is recommended to use an addition power source when using the Beloader.


When this happens, do you notice the K2's LED go out and/or the RGB LEDs on your mouse/keyboard?

07/03/2023 10:36 AM

Reply to:

It is recommended to use an addition power source when using the Beloader.


When this happens, do you notice the K2's LED go out and/or the RGB LEDs on your mouse/keyboard?

Hi, Yes the LED's go out on m&kb , but not on the KM2 as there's a power sauce plugged in.


The LED on the beloader remains green and connected to the remote play.


The power source is 10w with a 5.3v output.

07/05/2023 1:08 AM

Reply to:

Hi, Yes the LED's go out on m&kb , but not on the KM2 as there's a power sauce plugged in.


The LED on the beloader remains green and connected to the remote play.


The power source is 10w with a 5.3v output.

Out of curiosity, would you be able to try with a PS4 controller to see if the K2's normal functionality is affected when bypassing the Beloader?

07/10/2023 9:30 AM

Add a comment

Welcome,